Make great votive candles every time with this combination of mould and wick pin!!

These pins are an ingenious little device to take the chore out of making votive candles. They save a tremendous amount of time and effort and are very easy to use.

Simply put the wick pin into your votive candle mold and pour your wax. Once the wax sets unmould your candle and remove the pin by pushing the end of the pin gentle against the counter or benchtop or a piece of wood and the pin slides right out. You then slide a pre-waxed votive wick with tab into the hole left by the pin.

Mould Dimensions:
Approx. 50mm high
Diameter measuring approx. 35mm at the base and 45mm at the top.
Creates votive candles weighing approx. 50g

The wick pin has a diameter base size of 35mm and a height of 65mm.